Zjjl Tech Logo

Author: admin

admin Avatar
  • How to Remove a Gpu from a Motherboard: Expert Tips

    To remove a GPU from a motherboard, disconnect the PCIe cable from the graphics card and press down the clip on the cable to release the connector. Then, use a Phillips screwdriver to remove the two screws holding down the GPU to the PCIe slots on the back of the PC, and press down on…

    Continue reading →

  • How to Adjust GPU Fan Speed

    How to Adjust GPU Fan Speed: Mastering Fan Control

    To adjust GPU fan speed, use software like MSI Afterburner to create a custom fan speed profile. Install the software, launch it, click on “Settings,” then select the “Fan” tab. Enable user-defined software automatic fan control and choose the “Custom” option from the drop-down menu next to the predefined fan speed curve. Apply the changes…

    Continue reading →

  • How to Connect Wifi Antenna to Motherboard

    How to Connect Wifi Antenna to Motherboard?

    To connect a WiFi antenna to a motherboard, locate the two threaded studs in golden color on the rear I/O panel of the motherboard and attach the antenna by screwing it onto the studs. Ensure that the antenna is positioned in a location that provides the best signal strength for optimal performance. If you’re looking…

    Continue reading →

  • How to Add PCIe Slots to Motherboard

    How to Add PCIe Slots to Motherboard?

    To add PCIe slots to a motherboard, you have two options: purchase a motherboard with more PCIe slots or use a PCIe splitter or riser. Understanding PCIe Slots When it comes to expanding the capabilities of your motherboard, PCIe slots play a vital role. Understanding what these slots are and their importance is crucial if…

    Continue reading →

  • How to Remove Corsair CPU Cooler

    How to Remove Corsair CPU Cooler: Easy and Effective Steps

    To remove Corsair CPU cooler, lightly twist the cooler clockwise and counterclockwise to loosen the seal between the heatsink and the CPU. Carefully lift the cooler from the CPU. Make sure the CPU remains seated in the socket. Removing a Corsair CPU cooler is a straightforward process that can be done with minimal effort. Whether…

    Continue reading →

  • How to Remove Gpu from Motherboard

    How to Remove GPU from Motherboard?

    To remove a GPU from the motherboard, first, disconnect the PCIe cable by pressing down the clip on the cable and releasing the connector. Next, use a Phillips screwdriver to remove the two screws holding down the GPU on the back of the PC. Finally, press down on the PCIe latch to completely release the…

    Continue reading →

  • How to Install Windows 11 on MSI Motherboard

    How to Install Windows 11 on MSI Motherboard

    To install Windows 11 on an MSI motherboard, insert the Windows disc into your computer and boot it up, then follow the on-screen instructions. Credit: www.pcmag.com Preparing The Msi Motherboard For Installation Learn how to prepare your MSI motherboard for installing Windows 11 without any hassle. Follow our step-by-step guide to ensure a successful installation…

    Continue reading →

  • How to Turn off And CPU Fan Lights?

    How to Turn off AMD CPU Fan Lights: A Step-by-Step Guide

    To turn off AMD CPU fan lights, you can cut the wire that supplies current to the LED inside the fan housing. If you want to restore the lights in the future, you can connect a small SPST switch across the cut wires. To disable the RGB lights, you can disconnect the wire next to…

    Continue reading →

  • How to Undervolt CPU on Gigabyte Bios

    How to Undervolt CPU on Gigabyte Bios: Maximize Performance & Efficiency

    To undervolt CPU in Gigabyte BIOS, access the Precision Boost Overdrive menu and use the curve optimizer instead of setting an all core negative offset. Undervolting is safe, but aggressive undervolting may cause system instability. It won’t damage the CPU, but it’s important to find the right balance to avoid unexpected errors. Additionally, undervolting can…

    Continue reading →

  • How to Calibrate a Power Supply: Step-by-Step Guide

    Calibrating a power supply involves checking and adjusting the voltage and current measurements to ensure accuracy. This can be done by using a digital multimeter or other standard measurement tools to compare the readings with the desired values. It is essential to follow a calibration procedure that includes checking voltage accuracy, calibrating the current meter,…

    Continue reading →