Zjjl Tech Logo

How to Turn off And CPU Fan Lights: A Step-by-Step Guide

Author:

Published:

Updated:

How to Turn off And CPU Fan Lights?

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

To turn off AMD CPU fan lights, you can cut the wire that supplies current to the LED inside the fan housing. If you want to restore the lights in the future, you can connect a small SPST switch across the cut wires.

To disable the RGB lights, you can disconnect the wire next to the LED or adjust the settings in the motherboard’s BIOS menu.

Step 1: Understanding The Wiring

In order to turn off the AMD CPU fan lights, the first step is to understand the wiring. By locating and identifying the wires responsible for powering the fan lights, you can effectively control their operation. In this section, we will guide you through the process of identifying the specific wire that supplies current to the LED lights.

Locate The Wires Responsible For Powering The Amd Cpu Fan Lights

The first task is to locate the wires that are responsible for powering the AMD CPU fan lights. To do this, you will need to open up your computer case and locate the fan connected to your CPU. Once you have located the fan, trace the wires connected to it.

You may find multiple wires connected to the fan, but pay attention to the ones that are connected to the LED lights. These wires are usually distinct and can be identified by their color or markings. Make sure to take note of these wires as they will be essential in the following steps.

Identify The Wire That Supplies Current To The Led

Now that you have found the wires connected to the LED lights, the next step is to identify the specific wire that supplies current to them. This wire is responsible for powering the lights and by targeting it, you can effectively turn them off.

Take a close look at the wires connected to the LED lights. They are usually smaller in size and may be marked with labels such as “LED” or “RGB”. If there are no labels, pay attention to the color of the wires. Usually, the wire supplying the current to the LED lights will be different in color from the other wires connected to the fan.

Once you have identified the wire that supplies current to the LED lights, you can proceed to the next step of turning off the AMD CPU fan lights.

Step 2: Disconnecting The Wire

To turn off the AMD CPU fan lights, you can disconnect the wire that supplies current to the LED but is not needed for the fan. Simply cut the wire or connect a small SPST switch across it to restore the lights if desired.

Safely Turn Off Your Computer Before Proceeding

Before you start disconnecting the wire that powers the LED lights of your AMD CPU fan, it is important to ensure the safety of your computer. Turning off your computer properly will prevent any potential damage and ensure a smooth process. To do this, follow the steps below:
  1. Save any open files and close all running applications.
  2. Click on the “Start” button in the bottom left corner of your screen.
  3. Select the “Power” option.
  4. Choose “Shut down” to turn off your computer.

Carefully Disconnect The Wire That Powers The Led Lights

Now that your computer is safely turned off, you can proceed to disconnect the wire that powers the LED lights on your AMD CPU fan. It is crucial to handle this process with care to make sure you only disconnect the wire for the lights and not the fan itself. Follow the steps below:
  1. Locate the wire that powers the LED lights on your AMD CPU fan. It is usually a small, thin wire connected to the fan housing.
  2. Carefully grasp the connector of the wire and gently unplug it from the corresponding port on the motherboard.
  3. Ensure that you do not accidentally disconnect any other wires or connectors that are essential for the fan’s operation.
  4. If you are unsure about which wire to disconnect, refer to the documentation provided with your AMD CPU fan or consult the manufacturer’s website for specific instructions.
By following these steps, you can successfully disconnect the wire that powers the LED lights on your AMD CPU fan without affecting the fan’s functionality. Remember to handle the wire and connectors with care to avoid any damage.

Step 3: Securing The Wire

To turn off AMD CPU fan lights, you can disconnect the wire next to the LED or cut a wire that supplies current to the LED but is not needed for the fan. If you want to restore the lights later, you can connect a small switch across the cut wires.

Now that you have successfully disconnected the wire responsible for the annoying AMD CPU fan lights, it’s important to take a few extra steps to secure it properly. This will prevent any accidental reconnection and ensure a clean, uninterrupted experience. There are a couple of methods you can use to secure the wire, such as using electrical tape or zip ties. Let’s take a closer look at each of these options.

Use Electrical Tape

Using electrical tape is a simple yet effective way to secure the disconnected wire. Here’s how you can do it:
  1. Start by carefully wrapping electrical tape around the disconnected wire.
  2. Ensure that the tape is tightly secured and covers the exposed end of the wire completely.
  3. Make sure not to apply too much pressure that could damage the wire or interfere with the fan’s functionality.

Utilize Zip Ties

Another option to secure the disconnected wire is by using zip ties. Follow these steps to properly secure the wire with zip ties:
  1. Take a zip tie and slide it around the disconnected wire.
  2. Gently tighten the zip tie, ensuring that it is securely fastened around the wire.
  3. Do not overtighten the zip tie to prevent any damage to the wire or fan.
  4. Cut off any excess length from the zip tie, leaving a neat and tidy finish.
Using zip ties allows for easy installation and removal if needed in the future, while still keeping the wire securely in place. Remember, the primary goal is to secure the wire in a way that doesn’t interfere with the fan’s functionality. Whether you choose electrical tape or zip ties, ensure that the wire remains intact and protected. This way, you can enjoy a fan that functions flawlessly without any distracting lights. By following these steps, you can effectively turn off the AMD CPU fan lights and secure the wire, allowing for a streamlined and uninterrupted experience.

Step 4: Testing

To turn off the AMD CPU fan lights, you can disconnect the wire next to the LED or cut the wire that supplies current to the LED. If you want to restore the lights, you can connect a small switch across the cut wires.

Now that you have successfully disconnected the wire responsible for illuminating the AMD CPU fan lights, it’s time to perform a quick test to ensure that the lights no longer turn on. Follow the steps below to complete this final test:
  1. Turn on your computer and allow it to boot up completely.
  2. Observe the AMD CPU fan closely to see if the lights illuminate.
  3. If the lights remain off, congratulations! You have successfully turned off the AMD CPU fan lights.
  4. If, however, the lights still turn on, it is possible that you may have disconnected the wrong wire or missed a connection. In this case, you will need to revisit the wiring and ensure that you have disconnected the correct wire responsible for powering the fan lights.
  5. Double-check the wiring connections and make sure that you have removed the correct wire. Sometimes, it can be easy to overlook a connection or accidentally disconnect the wrong wire.
  6. Once you are confident that you have disconnected the correct wire, repeat the test by turning on your computer again.
  7. If the lights still turn on after revisiting the wiring, it may be beneficial to consult the user manual or seek technical support for your specific AMD CPU fan model.
Remember, the goal is to ensure that the AMD CPU fan lights no longer illuminate when your computer is turned on. By thoroughly testing and verifying the lights’ status, you can ensure that your desired outcome has been achieved.
Turn on your computer and verify that the AMD CPU fan lights no longer illuminate.

Step 5: Restoring The Fan Lights (optional)

Restoring the fan lights on your AMD CPU is an optional step, but if you want to turn them off, you can do so by tracing the wiring inside the fan housing. Find the wire that supplies current to the LED and cut it, or connect a small switch if you want to restore the lights later.

If You Wish To Restore The Fan Lights At A Later Time, You Can Reconnect The Wire You Previously Disconnected

If you ever change your mind and decide you want to restore the fan lights on your AMD CPU, it’s a fairly simple process. Just follow these steps:

  1. Locate the wire that you previously disconnected to turn off the fan lights. It is usually a small wire connected to the fan housing or the RGB header on your motherboard.
  2. Ensure that your computer is turned off and disconnected from any power source before proceeding.
  3. Take the wire and carefully reconnect it to its original position. Make sure it is securely fastened.
  4. Once the wire is reconnected, you can turn on your computer and the fan lights should start working again.

Consider Using A Small Spst Switch To Easily Toggle The Fan Lights On And Off

If you want a more convenient way to turn the fan lights on and off without having to disconnect and reconnect wires, you can consider using a small SPST (Single Pole, Single Throw) switch. This will allow you to easily toggle the fan lights on and off with just a flip of the switch.

Here’s how you can install a small SPST switch:

  1. Choose a suitable location for the switch. It should be easily accessible and preferably near the fan housing.
  2. Disconnect the wire that controls the fan lights from its current position.
  3. Cut the wire and strip the ends to expose the bare wire.
  4. Take the two stripped ends of the wire and connect them to the terminals of the SPST switch.
  5. Securely fasten the switch in its chosen location.
  6. Ensure that your computer is turned off and disconnected from any power source before proceeding.
  7. Once everything is connected, you can turn on your computer and use the switch to easily toggle the fan lights on and off as desired.

Using a small SPST switch provides a convenient way to control the fan lights without the need to constantly connect and disconnect wires. It gives you the flexibility to turn the lights on when you want to showcase your PC’s aesthetic, and turn them off when you prefer a more understated look.

How to Turn off Amd Cpu Fan Lights: A Step-by-Step Guide

Credit: www.amazon.com

Frequently Asked Questions For How To Turn Off Amd Cpu Fan Lights

Can I Turn Off Cpu Fan Light?

Yes, you can turn off the CPU fan light by cutting the wire that supplies current to the LED. If you want the ability to restore the lights, you can connect a small switch across the cut wires.

How Do I Turn Off Rgb Lights?

To turn off RGB lights, locate the wire connected to the LED and disconnect it. Some motherboards may use different names for the lighting, such as RGB_HEADER. Alternatively, you can cut the wire supplying current to the LED, but make sure it is not needed for the fan.

If you want to restore the lights later, you can connect a small SPST switch to the cut wires.

How Do You Turn Off The Led On Cooler Master?

To turn off the LED on Cooler Master, you need to disconnect the wire next to the LED or trace the wiring inside the fan housing and cut the wire supplying current to the LED. If you want to restore the lights, you can connect a small switch to the cut wires.

Control options may vary depending on the motherboard settings.

How Do I Control Rgb On My Cpu Cooler?

To control RGB on your CPU cooler, you can adjust the settings in the BIOS under the hardware monitor or thermal menu. You can also find RGB settings in the peripherals, LED, or lighting menu. Disconnecting the wire next to the LED will turn off the RGB lighting.

Conclusion

To turn off AMD CPU fan lights, you can disconnect the wire next to the LED or trace the wiring inside the fan housing and cut the wire supplying current to the LED. This will ensure the RGB lights are turned off.

Remember, you can always connect a small SPST switch across the wires if you want to restore the lights later. Adjusting fan settings and RGB settings can also be done through BIOS and motherboard controls.

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • How to Fix Evap System Monitor: Step-by-Step Guide

    How to Fix Evap System Monitor: Step-by-Step Guide

    To fix the Evap system monitor, check for a loose gas cap or replace it if it is damaged. This can solve the issue of fuel vapor escaping and triggering the DTC. Additionally, ensure that the drive cycle is completed properly for the monitor to run effectively. Need to fix the Evap system monitor? One…

    Read more

  • How to Make Ankle Monitor More Comfortable: Simple Tips

    How to Make Ankle Monitor More Comfortable: Simple Tips

    To make an ankle monitor more comfortable, you can incorporate a sweatband or roll down the sock. This will help prevent the monitor from bouncing around and provide a more comfortable fit. Credit: www.independent.co.uk 1. Choosing The Right Size When it comes to wearing an ankle monitor, comfort is key. One of the most important…

    Read more